Manufacturer: Ubiquiti Networks Category: Remnants > WiFi Bridge
shipment in 1-2 days
Productfeatures for 1 access point
Access point holder (see product image) is offered as option for professional mounting in the wall, cailing or ground
2x Outdoor Wireless Bridge 802.11a 5GHz - 8km/75Mbit WPA2
Item No.: 81702, Condition: New, Availability: in stock
Both Access Points come assembled with a built in 19dBi antenna, PoE adapter, 15m Cat5e cable, preconfigured as a wireless bridge
240,00 EUR
Product in stockshipment in 1-2 days
285,60 € incl. 19% MwSt
Productfeatures for 1 access point
- Processor: Atheros MIPS 74KC, 560 MHz
- Memory: 64MB SDRAM, 8MB Flash
- Network: 1x RJ-45, 100 Megabit
- 2x2MIMO, 5180MHz-5825MHz, TX power: 26dBm
- Size: 189x189x65mm, 0.5kg
- Antena Gain: 19dBi
- Operating Temperature: -30C to +70C
- IEEE 802.11ac, ROHS, CE, FCC, DFS
- Power: 24V PoE Adapter, Verbrauch Max 8W
- 15m Cat6 outdoor cable in black
- Software: Linux AirOS
Access point holder (see product image) is offered as option for professional mounting in the wall, cailing or ground
Both bridges are delivered pre-assembled and pre-configured so that anyone (including laymen) can connect 2 separate networks together. The standard configuration is optimised for a distance of 8km. For this distance a bandwidth of over 75 MBit net can be achieved.
When installing, the so called Fresnel Zone should be taken into account. At 8km it is ca. 10m (that is the clearance in the middle of distance).
After installation you can change the following settings:
- Web access data, password, eventually username, IP, SSID
- WPA2 key
- Country (delivery setting is Germany) if needed
Before alignment you can increase the transmit power. After installation it should be decreased again.
Transmit power and frequency ranges for wireless networks are uniformly set across EU-Countries.
To assist easy alignment of the antenna, you have the facility to monitor the step less signal strength through the web interface.
Telephone support is available for this product.
Delivery contents:
2x bridge with
2x integrated 15dbi antennas
2x fixing brackets (adjustable) for mast mounting.
2x PoE Adapter 24V 0.8A
2x 15m Cat6 outdoor cable (black)
When installing, the so called Fresnel Zone should be taken into account. At 8km it is ca. 10m (that is the clearance in the middle of distance).
After installation you can change the following settings:
- Web access data, password, eventually username, IP, SSID
- WPA2 key
- Country (delivery setting is Germany) if needed
Before alignment you can increase the transmit power. After installation it should be decreased again.
Transmit power and frequency ranges for wireless networks are uniformly set across EU-Countries.
To assist easy alignment of the antenna, you have the facility to monitor the step less signal strength through the web interface.
Telephone support is available for this product.
Delivery contents:
2x bridge with
2x integrated 15dbi antennas
2x fixing brackets (adjustable) for mast mounting.
2x PoE Adapter 24V 0.8A
2x 15m Cat6 outdoor cable (black)