It is a professional product that acts as an access point as well as a repeater. Even on repeaters you can connect further repeaters to expand a network, see drawings below.
This product is suitable for houses that have weak or no WiFi connection in all rooms.
In a small building where the internet access is located on the lowest floor, you can expand wireless coverage to all 3 floors with 3 devices (see picture left side). Using Hotspot 05 ( more about Sylbek Hotspot
), both private and public networks are treated separately across all repeaters.
If possible you should place the network source, (see right picture) in the middle of the house. This achieves a higher speed on the upper floor.
DualSSID Repeater solution for small networks/houses
For larger houses are needed many access points/repeaters. For houses with a lot of concrete and a building width of about 10m, you will usually need 2 repeaters per floor, with 15m 3 pieces.
As you can see in the picture below, such a network can contain up to 9 repeaters.
Network expanding (without cable) makes little sense because the speed of each repeater that forwards the connection is halved (see 01, 03, 07, 09).
DualSSID Repeater solution for big houses
You can also connect Sylbek Repeater by cable (eg 02-05-08) To achieve better speed (due to suspended ceiling). In this case, the additional WiFi connection is disconnected as soon as you load the supplied configuration.
1x DualSSID Repeater-S11
1x 24V 4.8W power supply incl. PoE passive adapter
1x 5m Cat5e flat cable in white
1x wall/ceiling mounting material
1x Alternative case 88x52x20mm
A phone installation support is available for this product.